agent-reflex git:20261019.3eaf89eB

Immutable. This exact content never changes and is served at /api/v1/blob/98a47c1d65e0c323.

---
name: agent-reflex
description: Brief on the agent-reflex plugin's capabilities, and install or update the plugin by running its install script (update mode needs no answers)
---

# agent-reflex plugin

An OpenCode plugin that adds a small System One decision model (Jev, nimble, d1,
liquid-d1...) as a classifier to the agent loop. This skill briefs the user on
its capabilities and installs or updates it. The installer also installs the
Claude Code, Codex, Hermes, Qwen Code, Antigravity, Pi and MiMo Code ports when
their CLIs are present.

## Locate the installer

When this skill runs from the repository, the installer is at
`../../../install.sh` relative to this skill's directory, the README at
`../../../README.md`, example configs at `../../../opencode.example.jsonc`,
the source at `../../../plugins/opencode/index.ts`.

When this skill was installed standalone (e.g. via
`npx skills add psygreg/agent-reflex`), the repository is not present: clone
it first and use `<clone>/install.sh` instead:

```sh
git clone https://github.com/psygreg/agent-reflex /tmp/agent-reflex
```

## Requirement

The plugin needs a System One decision model as its classifier, served at
`<baseURL>/systemone`: local llama.cpp (0.6+)/Ollama (0.35+)/LM Studio
(0.4.26+), or TypeSafe's Jev through the TypeSafe API, OpenRouter, the Vercel
AI Gateway or OpenCode Zen. A `fallbackModel` option retries the classifier when
the primary model rejects requests (e.g. a free-model window closing). Every
capability below is driven by this classifier.

## Capabilities (brief the user with this)

- **Decision-driven history compaction**: when the history grows long, the
  recent messages are kept verbatim (a keep-window that widens with the task's
  complexity), the most load-bearing older messages are kept too (bounded, so a
  long session cannot preserve its whole tail), and the rest are folded into a
  compact structured digest of the facts they established — so detail is
  compressed rather than discarded. Structural messages (tool calls/results) are
  scored like any other and only survive when load-bearing.
- **Complexity classification**: every prompt is scored *simple*, *medium* or
  *high*; `maxTokens` is set per level and medium/high prompts get a system
  note suggesting a confidence check before committing to a solution.
- **Automatic effort control**: when the agent has no non-default model variant
  or explicit effort setting, the classified level is written into each primary
  request in the dialect the requested model actually speaks, and sets the
  matching `maxTokens` cap. User-selected variants and effort settings take
  precedence. Wired dialects:
  Claude (`output_config.effort`), GPT reasoning models (`reasoning.effort` /
  `reasoning_effort`), GLM-5.2+ (`thinking.type` + `reasoning_effort`), Xiaomi
  MiMo V2.5+ (`thinking.type`, or `reasoning.effort` / `reasoning_effort` on
  the Responses API and gateway routes), Google Gemini 3+ (`thinkingLevel`, or
  `reasoning_effort` on OpenAI-compatible routes), Qwen 3.5+ / qwen-plus /
  qwen-max (`enable_thinking` + `reasoning_effort` on Chat Completions,
  `reasoning.effort` on Responses, `thinking.type` + `output_config.effort` on
  the Anthropic surface), Moonshot Kimi 2.7+/K3 (`reasoning_effort` on K3,
  `thinking.type` toggle on K2.7/K2.6), xAI Grok 4.3+ (`reasoning_effort`, or
  `reasoning.effort` on Responses; `none` disables on grok-4.3 only, `xhigh`
  tops out on grok-4.3/4.6+), MiniMax M3+ (`thinking.type: adaptive` stays on
  for MiniMax-M3 agent turns because disabling it can yield empty responses;
  `reasoning_effort` / `output_config.effort` tunes M3.1-Flash, and
  `reasoning.effort` is used on Responses; `none` is rejected), local
  llama.cpp/Ollama (`reasoning_effort`, plus `chat_template_kwargs` on llama.cpp). Dialects are
  detected per request, so multimodel setups never send a foreign field;
  models without a wired dialect stay untouched.
- **Confidence tool**: the `systemone_check_confidence` tool scores the
  model's current line of thought and returns CONTINUE or RESTART.
- **Tool exposure**: for each prompt the classifier decides which tools the
  task needs and the model is given only those, so the request carries fewer
  tool schemas and saves input tokens. The always-keep set is the common core
  (read/search/edit/shell/task) plus `reflex_run` and
  `systemone_check_confidence`, so the model can always follow the confidence
  guidance on complex tasks. Only the long tail (web, exec, subagents…) is
  trimmed to what the task clearly needs or the model already used this session.
  Everything is exposed if the classifier is unavailable. If filtering hides a
  needed tool, `systemone_reveal_tools` lists the agent's tool pool and restores
  all its schemas for the current user request.
- **Tool dispatch** (`reflex_run`): an optional fallback tool for when the model
  cannot decide which underlying tool a task needs. It asks the decision model
  which tool to use (a `choice` decision), runs it, and returns its real output.
  The model calls tools directly whenever it already knows which one fits and
  reaches for `reflex_run` only when the correct tool is unclear. The shell
  guardrail runs before dispatch. Tool dispatch uses the same configured
  classifier model as the rest of the plugin.
- **Shell guardrail**: shell commands are scored for damage potential;
  dangerous ones are denied.
- **Syntax checks**: after `edit`/`write` the file is checked with language
  parsers (plus a classifier bug check on medium/high), with one retry and
  then an ask-the-user stop.

Which features actually reach the agent — and with what caveat — is per agent:
see the support table below.

## Agent support

Eight agents are supported: OpenCode (the reference) plus the ports below. The
same features run in Claude Code (`plugins/claude-code`), Codex
(`plugins/codex`), Hermes (`plugins/hermes`), Qwen Code (`plugins/qwen-code`),
Antigravity (`plugins/antigravity`), Pi (`plugins/pi`) and MiMo Code
(`plugins/mimocode`), which the installer sets up when each CLI is
present. The classifier config is shared (`agent-reflex.jsonc`, same option
names), so the user answers the classifier questions once.

Which features reach each agent — and with what caveat — is in the table below.
Dynamic effort needs the plugin to rewrite the model request, and history
compaction needs it to rewrite the message list — both only reach agents whose hook
API allows that rewrite. OpenCode, Pi and MiMo Code all share the same
decision-driven compaction (Pi and MiMo Code gate it behind `AGENT_REFLEX_PRUNE=1`):

| Agent | Guardrail | Post-edit checks | Compaction guidance | Dynamic effort | History compaction | Tool exposure | Tool dispatch | Key caveat |
|---|---|---|---|---|---|---|---|---|
| OpenCode | hard block | inline | built-in | full (per-model dialects) | decision-driven | yes | yes (`reflex_run`) | Reference implementation; everything works. |
| Pi | hard block | inline | via `context` | full (`setThinkingLevel`) | opt-in decision-driven | yes (`setActiveTools`) | yes (`reflex_run`) | Pi translates the effort level per model itself. |
| MiMo Code | hard block | inline | compacting hook | token cap only | opt-in decision-driven | no | no | `chat.params` has `maxTokens` but no `reasoning_effort`. |
| Claude Code | hard block | inline | fact-extraction guidance | no | digest guidance only | no | no | `PreCompact` extracts fact buckets from the transcript to steer the summary, but cannot rewrite the message list. |
| Qwen Code | hard block | inline | fact-extraction guidance | no | digest guidance only | no | no | Same hook limits as Claude Code. |
| Codex | hard block | inline | inert | no | no | no | no | Compaction hook can only cancel compaction; edits via `apply_patch` (V4A). |
| Antigravity | hard block | one turn late | inert | no | no | no | no | `PostToolUse` cannot inject context (antigravity-cli#808). |
| Hermes | wrapper tool | inline | none | no | no | no | no | Hooks cannot block a tool call; guardrail is a `safe_run` wrapper. |

When installing or updating, tell the user which caveats apply to their agent and
point them at the port's own README (`plugins/<agent>/README.md`) for details.

## Updating an existing installation

`install.sh` detects an existing installation (plugin copy or config entry)
**before asking anything**, so updating needs no answers. Run it with stdin
closed:

```sh
bash ../../../install.sh </dev/null
```

- Only the plugin files are refreshed (in `~/.config/opencode/plugins/reflex/`
  or next to the config that references it); the configured options are left
  untouched. The Claude Code plugin files under `~/.claude/plugins/agent-reflex/`,
  the Codex plugin files under `~/.codex/plugins/agent-reflex/`, the Hermes
  plugin files under `~/.hermes/plugins/agent-reflex/`, the Qwen Code
  extension files under `~/.qwen/extensions/agent-reflex/`, the Antigravity
  plugin files under `~/.gemini/config/plugins/agent-reflex/`, and the Pi
  extension files under `~/.pi/agent/extensions/agent-reflex/`, and the MiMo Code
  hook files under `~/.config/mimocode/hooks/` and `~/.config/mimocode/tools/`
  are refreshed too, and their `agent-reflex.jsonc` is left untouched.
- If it instead prints the setup menu and ends with "No input available
  (stdin closed)", there is no installation yet — follow the fresh-install
  section below.
- After updating, **tell the user to restart OpenCode** (`opencode service
  restart`). Do not restart it yourself: it would terminate this session.

## Fresh install

The installer asks questions in a fixed order and reads the answers from
stdin, so collect them from the user in chat first, then pipe them in one
line each. The exact order:

1. Provider: `1` llamacpp, `2` ollama, `3` lmstudio, `4` typesafe,
   `5` openrouter, `6` vercel, `7` opencode (OpenCode Zen), `8` custom.
2. Providers 1-3 only: "Server runs on this machine?" — `Y` or `n`. If `n`,
   the next answer is the remote base URL including `/v1`
   (e.g. `http://192.168.1.10:8080/v1`). Provider 8 (custom) takes the base
   URL here directly.
3. Classifier model. An empty answer takes the preset default (`nimble`,
   `jev-latest`, `~typesafe/jev-latest`, `typesafe-ai/jev`, `jev-1.13`);
   required for llamacpp and lmstudio (their models are free-form ids).
4. API key, optional, `{env:NAME}` substitution supported and preferred over
   literal keys.
5. Fallback classifier model on the same endpoint, optional.
6. Debug log file path, optional.

Example — Jev through the TypeSafe API with the key from the environment:

```sh
printf '4\n\n{env:TYPESAFE_API_KEY}\n\n\n' | bash ../../../install.sh
```

(Colors are automatic and turn off by themselves when output is not a
terminal, so nothing extra is needed when running it from an agent.)

The installer copies the plugin next to the OpenCode config it finds
(`~/.config/opencode/` or `~/.opencode/`) and merges the plugin entry into
`opencode.json(c)`, keeping comments and formatting; a `.agent-reflex.bak`
backup is written and the merged file is validated before committing. The
merge needs bun, node (bundled with npm) or deno; without any of them the
script prints the entry for a manual paste — in that case, show the printed
entry to the user instead of editing the config blindly.

Report the script's `[agent-reflex]` messages to the user, confirm the merged
entry looks right, and remind them to restart OpenCode — again, do not run
`opencode service restart` from inside the session.