kicad-pcb-review git:20260606.1aab6cfA

Immutable. This exact content never changes and is served at /api/v1/blob/98b539f3d9469b4a.

---
name: kicad-pcb-review
description: Use this skill when reviewing, fixing, validating, or preparing KiCad PCB projects with the kicad MCP server.
---

# KiCad PCB Review Skill

Use this skill for KiCad projects, schematic review, PCB layout review, DRC/ERC, DFM, manufacturing exports, BOM, pick-and-place, stackup, SI/PI/EMC checks, and release package preparation.

## Required Behavior

1. **First verify the MCP server:**
   - Call `kicad_get_project_info`
   - Call `project_quality_gate`
   - Inspect KiCad version and project paths

2. **Never edit before reading** the current schematic and PCB state.

3. **For design changes:**
   - Explain proposed change
   - Use dry-run if available
   - Ask for confirmation before destructive/write tools

4. **After any edit:**
   - Run ERC
   - Run DRC
   - Run relevant DFM checks
   - Summarize files changed

5. **For manufacturing release:**
   - Run full validation loop
   - Export Gerber/drill/BOM/POS/STEP/PDF
   - Generate manifest
   - List warnings and waiver status

## Tool Preference

**Read-only first:**
- `kicad_get_project_info`
- `sch_get_symbols`
- `sch_get_net_names`
- `pcb_get_board_summary`
- `pcb_get_nets`
- `run_erc`
- `run_drc`
- `validate_design`
- `project_quality_gate`

**Write only when requested:**
- Schematic add/edit tools
- PCB add/edit tools
- Route tools
- Export/release tools

## Refusal Policy

Do not claim a board is manufacturing-ready unless ERC, DRC, DFM, BOM, POS and export checks have passed or every issue is explicitly documented.

## References

See `references/kicad-mcp-tool-map.md` for a complete tool listing.
See `references/pcb-review-checklist.md` for the PCB review process.
See `references/manufacturing-release-checklist.md` for release preparation.