permission-check · git:20260821.8a2f894 · 2026-08-21 · sha256 25f41a362d6b7aad
permission-check git:20260821.8a2f894A
Immutable. This exact content never changes and is served at /api/v1/blob/25f41a362d6b7aad.
No tool to install first
claude plugin marketplace add https://markdownregistry.com/mp/a/art_gn4dlaotkagxgcg4/25f41a362d6b7aadf9ee07cd62bddee4b34fe1838309131dd66d93a01bfab3fc.json
Then /plugin install permission-check@markdownregistry-gn4dlaotkagxgcg4 in Claude Code. It installs this exact version, the one graded A here, pinned to the commit it was graded at, and leaves it there.
---
name: permission-check
description: Diagnose why Claude Code is (or isn't) prompting for permission. By default reads only repo-local layers (CLI project, CLI project-local, VSCode workspace). Host-global layers (CLI user `~/.claude/`, VSCode user settings) are read ONLY when the user explicitly confirms — those files may contain unrelated paths or secrets. Use when user says "why is it asking me to approve?", "permission check", "why am I getting prompts?", "bypass isn't working", "check my permissions". Read-only diagnostic.
argument-hint: "(no arguments)"
allowed-tools: ["Read", "Bash", "Glob"]
disallowed-tools: ["Edit", "MultiEdit"]
---
# Permission Check
## Purpose
Surface the full permission-mode picture across every layer Claude Code honors, so the user can see at a glance why prompts are (or aren't) firing. Claude Code resolves permission mode from a 6-tier stack; a single misconfigured layer produces silent overrides that are hard to debug by eye.
## The 6 layers (precedence: bottom wins)
1. **VSCode user settings** — `~/Library/Application Support/Code/User/settings.json` (macOS), `%APPDATA%/Code/User/settings.json` (Windows), `~/.config/Code/User/settings.json` (Linux). Key: `claudeCode.initialPermissionMode`.
2. **VSCode workspace settings** — `<repo>/.vscode/settings.json`. Same key. Wins over user.
3. **CLI user settings** — `~/.claude/settings.json`. Key: `permissions.defaultMode`.
4. **CLI project settings** — `<repo>/.claude/settings.json`. Same key. Wins over user.
5. **CLI project-local settings** — `<repo>/.claude/settings.local.json`. Same key. Wins over project.
6. **In-session mode** — set at session start from layers 1-5, then mutable via `Shift+Tab` or `/permission-mode`. Authoritative until session ends.
**Key insight:** `initialPermissionMode` only fires at session start. If you toggled mid-session (or the session started before a settings change), the file-level settings are correct but the *runtime* mode differs. That's the #1 source of "bypass isn't working" confusion.
## Privacy contract
Host-global settings files (`~/.claude/settings.json`, VSCode user settings) may contain:
- Paths to unrelated projects and secrets
- API keys, tokens, or provider credentials added outside this repo
- Permission policies set by the user's org or employer
This skill is designed for defense-in-depth: **Phase A runs automatically and reads only repo-local files.** Phase B reads host-global files **only after the user explicitly confirms** — never silently. When reporting host-global layers, redact any key that is not directly relevant to `permissions.*` or `claudeCode.*`.
## Protocol
### Phase A: Repo-local layers (auto-runs)
Read these immediately — they are checked into (or gitignored inside) the repo and do not cross the trust boundary:
```bash
VSCODE_WS="${CLAUDE_PROJECT_DIR}/.vscode/settings.json"
CLI_PROJECT="${CLAUDE_PROJECT_DIR}/.claude/settings.json"
CLI_LOCAL="${CLAUDE_PROJECT_DIR}/.claude/settings.local.json"
```
For each file that exists, extract:
- **VSCode workspace:** `claudeCode.initialPermissionMode`, `claudeCode.allowDangerouslySkipPermissions`
- **CLI project / project-local:** `permissions.defaultMode`, `permissions.allow`, `permissions.deny`
Missing files are fine — report "not present" rather than erroring.
Print the resolved defaultMode from these three layers alone. If that already explains the prompt behavior (e.g., CLI project-local has `defaultMode: "default"` while project has `bypassPermissions`), stop here and surface the diagnosis.
### Phase B: Host-global layers (requires explicit user confirmation)
If Phase A is inconclusive — e.g., all repo-local layers agree on bypass but the user is still being prompted — ask the user:
> "To complete the diagnosis, I need to read two files outside this repo:
> - `~/.claude/settings.json` (CLI user-level)
> - your VSCode user settings (`~/Library/Application Support/Code/User/settings.json` on macOS; Linux/Windows vary)
>
> These may contain unrelated paths or secrets. I will redact any key that isn't in `permissions.*` or `claudeCode.*`. Proceed?"
Only after the user confirms, read:
```bash
# VSCode user (platform-dependent path; try all three)
case "$(uname -s)" in
Darwin) VSCODE_USER="${HOME}/Library/Application Support/Code/User/settings.json" ;;
Linux) VSCODE_USER="${HOME}/.config/Code/User/settings.json" ;;
MINGW*|MSYS*|CYGWIN*) VSCODE_USER="${APPDATA}/Code/User/settings.json" ;;
*) VSCODE_USER="" ;;
esac
CLI_USER="${HOME}/.claude/settings.json"
```
When reporting their contents, **extract only the relevant keys**:
- CLI user: `permissions.defaultMode`, `permissions.allow`, `permissions.deny`
- VSCode user: any key starting with `claudeCode.`
Never print the full file. Redact everything else to `(other keys redacted)`.
### Step 2: Compute resolved state
The resolved `defaultMode` is the value from the highest-precedence layer that sets it. Report:
- Which layer won the `defaultMode` contest.
- Merged `allow` list (union across CLI tiers).
- Merged `deny` list (union; any `deny` blocks the action even if allowed elsewhere).
- Whether VSCode says `bypass` but CLI says otherwise (or vice versa) — this is a legitimate conflict to flag.
### Step 3: Report runtime mode
The live in-session mode is exposed via the status line (see `.claude/scripts/statusline.sh`). Tell the user:
> "Your status line shows the current in-session mode in the top-right of the Claude Code panel. If that disagrees with the resolved `defaultMode` above, you (or Shift+Tab) overrode it mid-session. Press Shift+Tab to cycle back."
If the status line isn't configured, emit a warning and point at `.claude/scripts/statusline.sh`.
### Step 4: Flag common failure modes
Check for and explicitly call out:
1. **Layer drift:** CLI project says bypass but CLI local says default → local wins, explains the prompts.
2. **VSCode-only bypass:** VSCode layers say bypass but no CLI layer does → terminal Claude Code will still prompt; extension may or may not.
3. **Empty allowlist + default mode:** `defaultMode: "default"` with empty `allow` → every tool prompts, as designed.
4. **Stale session:** settings are correct but user reports prompts → almost always a session that pre-dates the fix. Advise "Cmd+Shift+P → Developer: Reload Window, then new Claude Code session."
5. **`deny` wins:** any match in a `deny` list blocks the tool regardless of `allow`. Rare but deadly.
## Output format
```
=== PERMISSION STATE ===
Layer 1 — VSCode user: bypassPermissions (allowDangerouslySkipPermissions: true)
Layer 2 — VSCode workspace: bypassPermissions
Layer 3 — CLI user: bypassPermissions (allow: ["*"])
Layer 4 — CLI project: bypassPermissions (allow: ["Edit(**)", "Bash(*)", ...])
Layer 5 — CLI project-local: bypassPermissions (allow: [...], deny: [])
Resolved defaultMode: bypassPermissions (set by Layer 5)
Merged allow: Edit(**), Write(**), Bash(*), ...
Merged deny: (none)
=== RUNTIME ===
Check the status line at the top of the Claude Code panel. Expected: [BYPASS].
If it shows [PROMPT], [AUTO-EDIT], or [PLAN] — that's an in-session override. Press Shift+Tab to cycle.
=== DIAGNOSIS ===
No layer drift detected. If you are still seeing prompts:
1. Session is stale (started before settings were applied) — reload window + new session.
2. VSCode extension bug — check extension version and file an issue.
3. Tool was previously denied in this session — that denial is remembered. New session clears it.
```
If any layer disagrees, replace the "No layer drift detected" line with a specific flagged issue.
## Notes
- This skill is read-only. It never modifies settings.
- If `$CLAUDE_PROJECT_DIR` is unset, fall back to `git rev-parse --show-toplevel`.
- Platform-aware: detect macOS vs Linux vs Windows for the VSCode user path.