madgraph-simulator git:20260315.85ba619A

Immutable. This exact content never changes and is served at /api/v1/blob/b540d77aa3478f66.

---
name: madgraph-simulator
description: Run MadGraph5_aMC@NLO event generation for particle physics simulations via Magnus cloud. Triggers when the user wants to generate Monte Carlo events, simulate collider processes, or run MadGraph5. Supports Pythia8 parton shower and Delphes detector simulation.
---

# MadGraph Simulator

## Overview

This skill runs MadGraph5_aMC@NLO for Monte Carlo event generation using two Magnus blueprints executed in sequence:

1. **`madgraph-compile`** — imports the UFO model, defines processes, generates Feynman diagrams, computes matrix elements, and produces a compiled process directory
2. **`madgraph-launch`** — takes the compiled process directory and runs event generation with specified physics parameters, optional Pythia8 shower, and optional Delphes detector simulation

Both steps execute on the Magnus cloud (see magnus skill).

## Workflow

### Step 1: Compile the Process

```bash
magnus run madgraph-compile -- \
  --ufo path/to/MyModel_UFO \
  --process "p p > t t~" \
  --output path/to/pp_ttbar \
  --definitions "l+ = e+ mu+
l- = e- mu-
vl = ve vm
vl~ = ve~ vm~"
```

**Parameters**:

| Parameter | Required | Description |
|-----------|----------|-------------|
| `--ufo` | No | Path to UFO model directory (for custom BSM models; mutually exclusive with `--model`) |
| `--model` | No | MG5 built-in model name, e.g. `sm`, `mssm` (mutually exclusive with `--ufo`) |
| `--process` | Yes | Process definition(s), one per line. First line becomes `generate`, rest become `add process` |
| `--output` | Yes | Where to download the compiled process directory |
| `--definitions` | No | Multiparticle definitions, one per line (without the `define` keyword) |

**`--definitions` format**: each line is `label = particle1 particle2 ...`. Do **NOT** include the `define` keyword — the blueprint adds it automatically.

```
# CORRECT:
l+ = e+ mu+

# WRONG (will cause errors):
define l+ = e+ mu+
```

The UFO directory (if provided) is uploaded via FileSecret. When using `--model`, no file upload is needed — MG5 uses its built-in model. You must provide either `--ufo` or `--model` (defaults to `sm` if neither is given).

**WARNING**: If `--output` points to an existing directory, it will be **deleted and replaced** by the download.

**Downloaded directory structure** (example: `--output tmp/pp_ttbar`):
```
tmp/pp_ttbar/
├── Cards/
│   ├── param_card.dat
│   ├── run_card.dat
│   └── ...
├── SubProcesses/
├── Source/
├── bin/
└── ...
```

**Result** (`magnus job result <job-id>`):
- `success` (bool)
- `process_dir` (str): path to compiled process directory

### Step 2: Launch Event Generation

```bash
magnus run madgraph-launch -- \
  --process path/to/pp_ttbar \
  --commands "done
set nevents 1000
set ebeam1 7000
set ebeam2 7000
done" \
  --output path/to/pp_ttbar
```

**Parameters**:

| Parameter | Required | Description |
|-----------|----------|-------------|
| `--process` | Yes | Path to compiled process directory (from Step 1) |
| `--commands` | Yes | MG5 launch body — everything after `launch <dir>` (see state machine below) |
| `--output` | Yes | Where to download the output directory (with Events/) |
| `--pdf` | No | LHAPDF PDF set name to install before running (e.g. `LUXlep-NNPDF31_nlo_as_0118_luxqed`). Downloaded from CERN if not already present. |

The process directory is uploaded via FileSecret. On success, the full output directory (including `Events/run_XX/`) is downloaded to `--output`.

**WARNING**: If `--output` points to an existing directory (e.g. the same path used for compile), it will be **deleted and replaced** by the download. The downloaded directory includes the compiled process plus the generated events.

**Downloaded directory structure** (example: `--output tmp/pp_ttbar`):
```
tmp/pp_ttbar/
├── Cards/
├── Events/
│   └── run_01/
│       ├── unweighted_events.lhe.gz              # always present
│       ├── run_01_tag_1_banner.txt
│       ├── tag_1_pythia8_events.hepmc.gz         # if Pythia8
│       ├── tag_1_delphes_events.lhco.gz          # if Delphes
│       └── tag_1_delphes_events.root             # if Delphes
├── SubProcesses/
└── ...
```

**Result** (`magnus job result <job-id>`):
- `success` (bool)
- `output_dir` (str): path to output directory
- `cross_section` (str): e.g. "0.1234 +- 0.005 pb"
- `nevents` (int)
- `run_name` (str): e.g. "run_01"
- `param_card_warnings` (list, if any): duplicate PDG entries in param_card.dat

## launch_commands State Machine

The `--commands` string is processed by MG5 as a sequential state machine. Understanding this is critical for correct event generation.

**CRITICAL: `--commands` is ONLY the launch body.** The `madgraph-compile` blueprint already handles `import model`, `define`, `generate`, `add process`, and `output`. NEVER include these commands in `--commands` — they will cause errors. The `--commands` string starts from the point after `launch <dir>` has been issued.

### State 1: Shower/Detector selection

Lines before the **first** `done`:
- `shower=Pythia8` — enable Pythia8 parton shower
- `detector=Delphes` — enable Delphes detector simulation
- `done` — accept selections (or skip if none specified) and advance

### State 2: Card editing (only when shower or detector is enabled)

Lines between the first `done` and the **second** `done`:
- For Delphes: specify the detector card (`CMS`, `ATLAS`, or a full path)
- `done` — accept defaults and move to State 3

**When no shower or detector is selected**, State 1's `done` skips directly to State 3 (parameter setting). State 2 does not appear.

### State 3: Parameter setting

Lines after the preceding `done`:
- `set nevents <N>` — number of events
- `set ebeam1 <GeV>` / `set ebeam2 <GeV>` — beam energies
- `set param_card <BLOCK> <CODE> <VALUE>` — model parameters
- `set param_card MASS <PDG> <VALUE>` — particle masses
- `set param_card DECAY <PDG> <VALUE>` — set decay width (in GeV)
- `set param_card DECAY <PDG> Auto` — auto-calculate decay width (requires UFO embedded in process dir)
- `set use_syst False` — disable systematics (avoids LHAPDF-related failures when Python LHAPDF is unavailable)
- `set run_card pdlabel lhapdf` — use LHAPDF PDF set (required when using `--pdf`)
- `set run_card lhaid <ID>` — LHAPDF set ID (e.g. `82400` for LUXlep-NNPDF31_nlo_as_0118_luxqed)
- `set param_card MASS <PDG> scan:[v1,v2,v3,...]` — mass scan
- `done` — start the run

### Summary: number of `done` commands

| Scenario | States visited | `done` count |
|----------|---------------|-------------|
| No shower, no detector | 1 → 3 | **2** |
| Pythia8 and/or Delphes | 1 → 2 → 3 | **3** |

### CRITICAL: no consecutive `done` before `set` commands

The `done` that ends State 1 (or State 2) transitions into State 3. If you immediately write another `done`, MG5 starts the run **without setting any parameters**. Always place `set` commands before the final `done`:

```
done
set nevents 1000
set ebeam1 7000
set ebeam2 7000
done
```

**NOT**:
```
done
done
set nevents 1000    <-- TOO LATE, run already started
```

## Examples

### Parton-level (no shower, no detector)

```bash
# Compile
magnus run madgraph-compile -- \
  --ufo path/to/UFO \
  --process "p p > t t~" \
  --output tmp/pp_ttbar

# Launch
magnus run madgraph-launch -- \
  --process tmp/pp_ttbar \
  --commands "done
set nevents 1000
set ebeam1 7000
set ebeam2 7000
done" \
  --output tmp/pp_ttbar
```

Output events: `tmp/pp_ttbar/Events/run_01/unweighted_events.lhe.gz`

### With Pythia8 + Delphes (CMS detector card)

```bash
magnus run madgraph-launch -- \
  --process tmp/pp_ttbar \
  --commands "shower=Pythia8
detector=Delphes
done
CMS
done
set nevents 1000
set ebeam1 7000
set ebeam2 7000
set param_card MASS 6 172.76
set param_card SMINPUTS 1 127.9
done" \
  --output tmp/pp_ttbar
```

Output events:
- `Events/run_01/tag_1_pythia8_events.hepmc.gz` (hadron-level)
- `Events/run_01/tag_1_delphes_events.lhco.gz` (reco-level)
- `Events/run_01/tag_1_delphes_events.root` (reco-level, ROOT)

### BSM signal with mass scan and auto-width

```bash
magnus run madgraph-compile -- \
  --ufo path/to/ScalarModel_UFO \
  --process "p p > t h0, t > b l+ vl, h0 > mu+ mu-
p p > t~ h0, t~ > b~ l- vl~, h0 > mu+ mu-" \
  --output tmp/pp_tS \
  --definitions "l+ = e+ mu+
l- = e- mu-
vl = ve vm
vl~ = ve~ vm~"

magnus run madgraph-launch -- \
  --process tmp/pp_tS \
  --commands "shower=Pythia8
detector=Delphes
done
CMS
done
set nevents 100
set ebeam1 7000
set ebeam2 7000
set param_card SMINPUTS 1 127.9
set param_card MASS 6 172.76
set param_card YQLU 2 3 0.001
set param_card MASS 50001 scan:[20,40,60,80,100,120,140,160]
set param_card DECAY 50001 Auto
done" \
  --output tmp/pp_tS
```

### Lepton-initiated process with LUXlep PDF

```bash
# Compile (using SM model with lepton beams)
magnus run madgraph-compile -- \
  --model sm \
  --process "e+ u > e+ u" \
  --output tmp/ep_u

# Launch with LUXlep PDF set
magnus run madgraph-launch -- \
  --process tmp/ep_u \
  --pdf LUXlep-NNPDF31_nlo_as_0118_luxqed \
  --commands "done
set run_card pdlabel lhapdf
set run_card lhaid 82400
set nevents 1000
set ebeam1 7000
set ebeam2 7000
done" \
  --output tmp/ep_u
```

The `--pdf` flag downloads the specified LHAPDF PDF set into the cloud container before MG5 runs. You must also set `pdlabel` and `lhaid` in `--commands` to tell MG5 to use it.

## Key MG5 Syntax

### Process definition

```
p p > t t~                                    # Simple
p p > t t~, t > b l+ vl, t~ > b~ l- vl~      # With decay chains
```

Use `add process` (second line onward in `--process`) for charge-conjugate states.

### Multiparticle definitions

```
l+ = e+ mu+ ta+
l- = e- mu- ta-
vl = ve vm vt
vl~ = ve~ vm~ vt~
j = g u c d s u~ c~ d~ s~
```

### Setting parameters (in launch_commands)

```
set param_card MASS <pdg> <value>              # Set mass
set param_card <BLOCK> <code> <value>          # Set coupling
set param_card DECAY <pdg> <value>             # Set width (GeV)
set param_card DECAY <pdg> Auto                # Auto-calculate width
set param_card MASS <pdg> scan:[v1,v2,...]     # Mass scan
```

Read the UFO model's `particles.py` and `parameters.py` to find the correct PDG codes and block/code values.

### param_card duplicate PDG warning

The launch blueprint checks `param_card.dat` for duplicate PDG entries in the MASS block and DECAY declarations. If found, the result includes `param_card_warnings`. This typically indicates duplicate external/dependent mass entries in the UFO model's `parameters.py` — fix the `.fr` model and regenerate UFO.

## Reference Documentation

- See [references/madgraph_reference.md](references/madgraph_reference.md) for the complete MG5 command reference, including decay chain syntax, common processes, Pythia8/Delphes integration, parameter settings, and troubleshooting