git:20260702.ae1592b to git:20260802.883cfe7

24 added, 5 removed. Audit A to A.

---

name: test-all-device

description: Run the full hardware (onboard) CI pipeline (examples + tests/st) with automatic platform and device detection. Use when the user asks to run all device/hardware tests or the full onboard CI locally.

---

# Run the full hardware CI pipeline with automatic device detection

Detection / isolation procedures referenced below live in

[`../../lib/onboard-detection.md`](../../lib/onboard-detection.md).

1. If `command -v npu-smi` is not found, tell the user to use `/test-all-sim`

instead and stop.

2. **Precheck + detect platform** (§A) — gate on real silicon, then read the

detected arch into `PLATFORM`.

3. **Extract CI timeout** (§D, `st-onboard-<platform>` job):

`--pto-session-timeout`.

4. **Select a device range** (§C, range ≤4) — or, when wrapping in

`task-submit`, let it pick via `--device auto --device-num <range size>`.

- 5. **Run through `task-submit`** (§E). The underlying command:

+ 5. **Read the marker selector out of the same job** you took the timeout from.

+ `st-onboard-a2a3` is two pytest passes, not one: the sweep deselects

+ `-m "not sdma"` and a later step runs `-m sdma`. `st-onboard-a5` has no

+ marker filter. Take the expression from `ci.yml` rather than assuming, so

+ this skill cannot drift from the job it reproduces.

+ 6. **Run through `task-submit`** (§E). The underlying command, on a platform

+ whose job carries the filter:

```bash

- pytest examples tests/st --platform <platform> --device <range-or-$TASK_DEVICE> \

- --pto-session-timeout <timeout> -v

+ pytest examples tests/st -m "not sdma" --platform <platform> \

+ --device <range-or-$TASK_DEVICE> --pto-session-timeout <timeout> -v

```

+ Then the quarantined pass, after it — never at the same time, since the

+ point of the split is that no fault-injection case meets a device that has

+ already provisioned SDMA:

+ ```bash

+ pytest examples tests/st -m sdma --platform <platform> \

+ --device <2 devs or $TASK_DEVICE> --pto-session-timeout <timeout> -v

+ ```

+ Dropping either pass changes what you tested: a single flat sweep is not

+ what CI runs and reports failures CI never sees

+ ([`../testing/SKILL.md`](../testing/SKILL.md), issue #1425).

Parallelism is auto-driven by `--device`: on hardware, one in-flight

subprocess per device (`--max-parallel auto` = `len(--device)`); see

`docs/testing.md` for the full reuse hierarchy.

- 6. Report the results summary (pass/fail counts per task).

- 7. If any tests fail, show the relevant error output and which device failed.

+ 7. Report the results summary (pass/fail counts per task), across both passes.

+ 8. If any tests fail, show the relevant error output and which device failed.