plumbing-drainage-design-code SKILL.md skillA
plumbing-drainage-design-code from h30190/hjplus_taiwan_architect_kb is an agent skill: a SKILL.md folder an AI agent loads when a task calls for it.
mdr add h30190/hjplus_taiwan_architect_kb/plumbing-drainage-design-code@git:20260829.cd7ebe6Pins git:20260829.cd7ebe6 in mdr.lock. Pin the fingerprint instead.
- Audit grade
- A, 17 of 17 checks passed
- Kind
- SKILL.md skill
- Repository
- h30190/hjplus_taiwan_architect_kb
- Path
raw/建築法規/建築物給水排水設備設計技術規範/plumbing-drainage-design-code/SKILL.md- Versions recorded
- 3
- Latest version
- git:20260829.cd7ebe6, committed Aug 29, 2026
- First version recorded
- Jul 28, 2026
- Size
- 14,546 bytes
- Repository stars
- 169
- License
- a license file GitHub does not identify
This skill should be used when reviewing or calculating building water supply, hot water, and drainage/ventilation designs according to Taiwan's Technical Code for Building Plumbing and Drainage Equipment Design (建築物給水排水設備設計技術規範). It covers sizing water tanks and booster pumps, cold/hot water piping, Hunter fixture units (WSFU), drainage pipe slopes, trap seals (5-10cm), vent piping (stack/individual/loop/relief/yoke/AAV), grease interceptors, cleanout intervals, and same-floor drainage (同層排水).
Collected from public GitHub. Every version is saved exactly as it was and never changes. Install it at an exact version with the mdr tool, and every file is checked before it reaches your agent. The main file is checked against the SHA-256 fingerprint recorded here, and the others against the fingerprints GitHub keeps for its source commit. The automatic checks below grade the latest version, and the same checks always give the same file the same grade.
What the file says
# Building Plumbing and Drainage Equipment Design Code ## Overview This skill provides technical design and compliance evaluation procedures for building cold/hot water supply systems, drainage systems, ventilation piping, trap seal protection, cleanouts, same-floor drainage, and grease interceptors in Taiwan. It is based on Taiwan's official *Technical Code for Building Plumbing and Drainage Equipment Design* (建築物給水排水設備設計技術規範, per Building Technical Regulations Equipment Code Article 26). Use this skill when: - Designing or auditing water storage tank capacities (受水槽, 屋頂水塔) and maintenance clearances. - Sizing water supply pipes using Water Supply Fixture Units (WSFU) and verifying pressure limits (0.3–3.5 kg/cm²). - Calculating drainage pipe diameters (DFU) and minimum slopes (1/50 for 30~65mm, 1/100 for 75~100mm, 1/200 for ≥150mm). - Checking trap seal depth (5–10 cm), avoiding double trapping, and reviewing same-floor drainage (同層排水). - Verifying cleanout intervals (≤15m for ≤100mm, ≤30m for ≥125mm) and operating clearance (30–45 cm). - Configuring vent systems (stack, individual, loop, yoke, relief, wet vent, AAV) and roof termination heights. …
Read the whole file at its exact version.
How to install
mdr add h30190/hjplus_taiwan_architect_kb/plumbing-drainage-design-code@sha256:f76728435d5fb7d0The line at the top of this page pins the label git:20260829.cd7ebe6, which is what most people want. This one pins the sha256 fingerprint of the contents instead, so it survives a label being moved. Either way the exact version is written to mdr.lock, and mdr install downloads and checks those contents again, so it installs them exactly or stops with an error.
[](https://markdownregistry.com/a/art_6dkfuhgbwmhsr5j6)
3 badge image fetches in 30 days. What the badge shows.
Versions
The registry has recorded 3 versions of this file, between Jul 28, 2026 and Aug 29, 2026, about one every 16 days.
| version | committed | commit | size | audit | |
|---|---|---|---|---|---|
| git:20260829.cd7ebe6 latest | 2026-08-29 | cd7ebe6 | 14,546 B | A | view · diff |
| git:20260807.0499507 | 2026-08-07 | 0499507 | 14,197 B | A | view · diff |
| git:20260728.bbf3731 | 2026-07-28 | bbf3731 | 14,121 B | A | view |
Audit of the latest version
- pass: Frontmatter block present
- pass: Frontmatter declares a name
- pass: Frontmatter declares a description
- pass: Size between 200 bytes and 200 KB (14546 bytes)
- pass: No zero-width or bidi control characters
- pass: No instruction hidden inside an HTML comment
- pass: No link to an exfiltration or paste host
- pass: No credential-shaped string
- pass: No instruction to send local credentials anywhere
- pass: No text hidden with inline styles
- pass: No prompt-injection phrasing
- pass: No curl or wget piped into a shell
- pass: No recursive delete of root, home or parent
- pass: No instruction to read or print local credentials
- pass: No base64 blob over 200 characters
- pass: No link to a raw IP address
- pass: No script tag
Source
h30190/hjplus_taiwan_architect_kb · 169 stars · license a license file GitHub does not identify · pushed 2026-10-12 · branch main
API
GET https://markdownregistry.com/api/v1/artifacts/art_6dkfuhgbwmhsr5j6 GET https://markdownregistry.com/api/v1/resolve?ref=h30190/hjplus_taiwan_architect_kb/plumbing-drainage-design-code GET https://markdownregistry.com/api/v1/blob/f76728435d5fb7d0332e3f3034f80e5fe472b8c607d66cf519fdac1ab17aac81
Your AI assistant does the legwork. You hear about the deals worth your word. Hand yours the standing instructions at modelranch.com and it joins the network that reads files like this one.
Guides: the SKILL.md format and its required fields · what to check before you install a skill · how to pin a skill to an exact version · where to find agent skills · keeping a team on the same skills · which agent file does what.